top of page
Partners
Installation Guide
When an order has been delivered, it is the Sales Representative's responsibility to ensure the product is the proper size, has been installed, and is free of defects.
Installation Procedure
Follow these steps when installing a Flowstop for the first time
Step 1
Position the top chamber in opening at the proper height. Then inflate the top chamber to 1PSI.
Step 2
Reposition the top chamber so that the arrows at the front barely touch the ground and position the bottom chamber's corners in the opening. Then inflate the top chamber to 15 PSI.
Step 3
Ensure the bottom chamber's corners are still in place. Then inflate the bottom chamber to 15 PSI.
Step 4
Check that no air is leaking from the Flowstop or its valve. Test to ensure no water leakage with a garden hose and flashlight.
Video Tutorials
Tutorials
Search video...
Tutorial - How to install your FlowStop
03:20
Tutorial - How to use the electric pump
04:05
Tutorial - How to install FlowStop with straps
06:57
bottom of page